Variant form
Bimetal Switch
Grommet and spring Type
Cylindrical forming
- Different types of heaters such as round, triangle, or ones with holes offered at reasonable prices. Minimum order of one piece, with a quick delivery option.
- High thermal response due to low thickness, with a standard thickness of 1.5mm.
- Easy fit on cylinders, cones, and various curved surfaces because of its high flexibility.
- Available from low temperature through 200°C [392°F].
- Different designs including low voltage, 100V, 200V and 240V types available.
- Power density range of o.6-o.8W/cm2 (3.87-5.16W/in2) is suitable for our standard type in most cases, but this rate may vary depending on installation conditions or methods of thermal control. Please contact us with questions.
- The material of the silicone rubber heater, manufactured by Rogers (U.S.A), is complied with UL standard file No. E54153.
- STANDARD Type, E Type, and MG Type are all UL-94HB supportive, but more fire resistant type of UL94-V0 is available.
- Contact our engineering department if yellow card is required.
Heat tolerance | Heat Tolerance | 200°C |
---|---|---|
Max temperature | 250°C | |
Electric properties | Capacity Tolerance | ±10% |
Insulation Resistance | 100MΩ or over/DC500V | |
Electric Strength | 1500V/1min | |
Size | Max | 800mm×3000mm |
Min | 25mm×50mm | |
Thickness | 1.5mm |
OT-9 Separated type | Pt100Ω Sensor K Thermo-couple |
OT-9 PRO | K Thermo-couple |
EGO | 0-40°C, 30-110°C, 60-200°C |
Bimetal Switch | 10°C-200°C Temperature preference |
Thermal Fuse | 77°C-240°C Temperature preference |